英语专业文献阅读.pptxVIP

059844 Developing linear error models for analog devicesTechniques are presented for developing linear error models for analog and mixed-signal devices. A simulation program developed to understand the modeling process is described, and results of simulation are presented. Methods for optimizing the size of empirical error models based on simulated error analyses are included. Once established, the models can be used in a comprehensive approach for optimizing the testing of subject devices. Models are developed using data from a group of 13-bit A/D converters and composed with the simulation results.?开发模拟装置的线性误差模型。给出了开发模拟和混合信号装置线性误差模型的技术。描述了用于理解建模过程的仿真程序，给出了仿真结果。文中包括了基于仿真误差分析的经验误差模型规模的优化方法。一经建立，该模型便可在优化实验装置的测试中得到全面应用。模型的开发使用了从一组13位Ａ／Ｄ转换器上获得的数据和仿真结果。Natl InstNational InstituteTranstransaction [trAn5zAkF(E)n]n.办理, 处理, 会报, 学报, 交易, 事务, 处理事务034807 Software assembly workbench:how to construct software like hardwareThis paper describes an approach for assembling software by combining reusable building blocks, much in the way hardware is being designed. The approach uses a Software Assembly Workbench and is predicted on the existence of Network Execution Platform. The Network Execution Platform is a ‘network computer’ that performs network functions necessary to execute typical services. Its operating system provides access to telecommunication and computing functionality. The Software Assembly Workbench is based on two adjacent software layers, the Service (upper) layer and the Computer (intermediate) layer. These two layers require the implementation of a third (lower) layer, the Capability layer, which resides on the Network Execution Platform, the Software constructed using the two layers of the Software Assembly Workbench is first verified through Simulation. Both the execution platform and the application software are instrumented for failure detection and management. The uniqueness of this approach resides in our ability to rapidly create software that can be depen