Q_ASTM-G217-2016《耦合多电极在工业和实验室腐蚀监测标准》.pdf

ASTM G217 标准。测量仪器要有足够的分辨率。能测到 0.01 / 10 毫米年腐蚀速率 （大约对应于 那安培）。 Designation: G217 − 16 Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method1 Thisstandardisissuedunderthefifixeddesignation G217;the number immediately followingthedesignation indicatesthe year of originaladoption or,inthecaseofrevision,theyear oflast revision.Anumber inparenthesesindicatestheyear oflast reapproval.A superscript epsilon (´)indicatesan editorialchange sincethelast revision orreapproval. 1. Scope 1.1Thisguideoutlinestheprocedurefor conductingcorro sionmonitoringin laboratoriesandplantsbyuseofthecoupled multielectrodearray sensor (CMAS)technique. 1.2Forplant applications,thistechniquecanbeusedto assesstheinstantaneousnon-uniform corrosionrate,including localizedcorrosionrate,on acontinuousbasis,withoutre movalofthemonitoringprobes,fromtheplant. 1.3For laboratory applications,thistechniquecanbeused to studytheeffectsofvarioustestingconditionsandinhibitors onnon-uniform corrosion,includingpittingcorrosion and crevicecorrosion. 1.4 Units —Thevaluesstatedin SIunitsaretoberegarded asthe standard.Nootherunitsofmeasurement areincludedin thisstandard. 1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish app ro p riate safety and healthp ractices and determine the app lica bility of reg ulatory limitations p rior to use. 2. Referenced Documents 2.1ASTM Standards:2 G1PracticeforPreparing,Cleaning,andEvaluatingCorro sion Test Specimens G4 Guidefor ConductingCorrosion Testsin FieldApplica tions G16GuideforApplying StatisticstoAnalysisofCorrosion Data G46Guidefor Examination andEvaluation ofPittingCor rosion G48Test Methodsfor PittingandCreviceCorrosion Resis tanceof Stainless SteelsandRelatedAlloysbyUseof FerricChloride