USB 3.0 TO 20PIN 测试设备详解.pdfVIP

PLT3050B (Super Speed Transmission Analyzer) USB3.0 Assembly Production Line Tester PLT3050B Production Line Tester  Introduction PLT3050B is a Production Line Tester designed for USB3.0 Assembly Cable manufactory. Since the data rate of USB2.0 is not enough now, a higher rate is strongly recommended by the PC industry. In this way, USB3.0 is developed to meet this request. There are more and more manufactories to USB3-AR02BR USB3-BR02BR produce USB3.0 related products. For cable, how to meet customer’s request and guarantee the performance becomes a big issue. PLT3050B is designed for user as simple as possible, and measuring a DUT is very quick. It’s very suitable for mass productions USB3-MR02BR USB3-IR02BR and quality control. It is designed to reserve old version (PLT3050A) functions, not only to include old types of cables but also add USB3.0 Internal cables for testing. The default setting of testing for a cable is 1 second for each mode. In normal case, one DUT would be tested done for 6 seconds. When the environments of manufactory are under USB3-AP02BR consideration, it’s also designed with LED lights and voices results. After testing, all of the DUT’s results would be saved in PC for further check. The software is designed for several levels in order to let the operator to control easily. Version 1.01 Copyright 2012.All right reserved. This document will be subjected to change without notices Page 1 of 5 PLT3050B (Super Speed Transmission Analyzer) USB3.0 Assembly Production Line Tester USB3.0 Type A to A Connection USB3.0 Type A to B Connection USB3.0 Type A to Micro Connection USB3.0 Internal to A Connection Version 1.01 Copyr