- 1
- 0
- 约1.61万字
- 约 31页
- 2020-07-03 发布于湖北
- 举报
摘 要
本文在研究第三代移动通信系统 (TD-SCDMA的通用模型以及 Iu, Iub 接口协议的基础上, 重点对 RNC 的传输网络部分结构进行了详细 的介绍。 提出了传输网络子系统和其他子系统之间的接口 (如 A2, A4和 G 接口 的实现方案,最后给出了 TD-SCDMA 通信系统的传输网络 部分 TNSS 软件设计和实现的方案,主要实现了控制模块的设计。 传输网络子系统的设计是无线网络控制器 (RNC的重要部分。传 输网络子系统运行于 RNC 的信令处理板上,本论文的软件系统的开 发采用标准 C 语言进行编写,使得软件的运行速度、占用的系统资 源都得以很大的改善。
关键字:码分多址 (CDMA传输网络子系统 无线网络控制器
ABSTRACT
In this paper, on the basis of researching the common model of the third generation mobile communication systems (TD-SCDMAand the protocols of Iu, Iub, it introduce the structure of the transfer network of RNC in detail. The interfaces between TNSS and other sub-systems
原创力文档

文档评论(0)