AS4828.1-2009 国外国际规范.pdfVIP

1 AS 4828.1—2009 Australian Standard® A S 4 Degradability of plastics—Methods of test 8 2 8 . 1 — 2 Method 1: Determination of level of prodegradant 0 0 9 ions PREFACE This Standard was prepared by Standards Australia Committee EV-017, Degradability of Plastics. This Standard forms a part of a series of test methods and performance standards to enable certification bodies to validate and if appropriate, support claims. Test methods in the series include: AS 4828 Degradability of plastics—Methods of test 4828.1 Method 1: Determination of level of prodegradant ions 4828.2 Method 2: Determination of brittle point in plastic film using a tensile elongation test 4828.4 Method 4: Test method for heat ageing of degradable plastics FOREWORD Some plastics contain chemical additives that, when exposed to sufficient levels of ultraviolet radiation, or heat, accelerate the oxidation of the polymer and thus promote the 9 degradation of the physical properties of the plastic, ultimately leading to disintegration. 0 0 2 r The efficacy of the degradation of the plastic is a direct function of the level of the a M prodegradant metal salts. 8 0 n Depending on the intended disposal environmen