蓝牙一般应用状态机.docVIP

Application Flow: Write device classTurn Security onAllow SDP browsingInitialize HID library l Message == CL_INIT_CFM(Initialize the connection library) Message == HID_INIT_CFM(Initialize the HID library)Set app state to appDiscoverable.Store the library handle.status == successPanic and exit application.Cstatus == successPanic and exit application.YNYNYMessageLoop:Initialize the app_handlerInitialize the PIO lines (1,2,3,4 as o/p and 6,7,8,9 as i/p)Initialize the connection manager YABNYNSet appstate =appDiscoverableSet appstate =appDiscovera--bleConnectedSet the trust levelSet appstate = appCableConnectedAuthenticateSuccess?Store the connection instance. Write device class Turn Security on Allow SDP browsing Initialize HID library l Message == CL_INIT_CFM (Initialize the connection library) Message == HID_INIT_CFM (Initialize the HID library) Set app state to appDiscoverable. Store the library handle. status == success Panic and exit application. C status == success Panic and exit application. Y N Y N Y MessageLoop: Initialize the app_handler Initialize the PIO lines (1,2,3,4 as o/p and 6,7,8,9 as i/p) Initialize the connection manager Y A B N Y N Set appstate = appDiscoverable Set appstate = appDiscovera--bleConnected Set the trust level Set appstate = appCableConnected Authenticate Success? Store the connection instance. Save the HID interrupt sink Y Connection success? Message == HID_CONNECT_CFM (Confirm connection) Stop the pin-code entry Set the auth status to trusted. Y Stop the pin-code entry. Set auth status to idle N Authenticate == success ? Message == CL_SM_PIN_CODE_IND (Send pin-code response) A B A Y B YY Message == CL_SM_AUTHENTICATE_CFM(Authentication Y Y Message ==