毕业论文---外购铁精矿再磨再选工艺现状调查及分析（含外文翻译）.doc

外购铁精矿再磨再选工艺现状调查及分析 摘 要 随着钢产量的增加,包钢除采用自产铁精矿外,一直配加部分外购铁精矿。外购铁精矿来源较杂,成分、粒度都很不稳定,特别是硅含量偏高,粒度偏粗,铁品位在60 %～66 %之间,硅在4 %～10 %之间,用于高炉生产易造成波动。针对这一问题,选矿厂经过大量的试验研究,提出了利用闲置的选矿系列对外购铁精矿再磨再选提铁降硅的选矿工艺,为高炉的生产提供了精料，提高高炉利用系数，提高铁精粉品位，对外购铁精矿采用“磨矿-弱磁选-电磁螺旋柱-细筛-细磨-弱磁选”工艺流程，可实现再磨铁精矿品位达到69%。 关键词：再磨再选；细筛；铁精矿；电磁螺旋柱；弱磁选 Outsourcing iron concentrate again choose status grinding Investigation and chromatography Abstract With the growth of the steel product , in addition to the locally produced iron ore concentrate , Baogang also uses the out - purchased iron ore concentrate as an addition. The out - purchased iron ore concentrates are from many different places ,so both the composition and the particle size is not stable , especially the silicon content of those is higher and the particle size larger , and with the iron grade in 60 % - 66 % and silica in 4 % - 10 % , likely causing fluctuation in the blast furnace production. To this problem , a lot of research work has been done in our plant and as a result , the laid off dressing means are used again to decrease the silica content and improve the iron concentrate grade of the out - purchased iron concentrate , proving the qualified concentrate to the blast furnace production.Increase of blast furnace, improve the grade of iron essence pink, purchase by foreign iron concentrate grinding - low intensity magnetic separation column - electromagnetic spiral fine sieve - fine grind - low intensity magnetic separation process, which can realize more iron concentrate grade grinding achieved 69 percent. Key words: Then again choose grinding; Fine sieve; Iron ore; Electromagnetic spiral column; Weak magnetic 目 录 TOC \o 1-3 \h \u 691 摘 要 I 17352 Abstract II 20560 第一章 绪论 1 9357 1.1 研究背景 1 16067 1.2 研究意义 1 24076 第二章 考察内容 2 24166 2.1 再磨原料性质 2 2793 2.1.1 再磨原料性质分析 2 25623 2.1.2 考察原料性质分析 5 17946 2.2 第一阶段考察指标 8 31325 2.2.1 电磁螺旋柱 8 9697 2.2.2 浓缩作业 14 1249 2.2.3 磨矿作业 15 12441 2.2.4 φ350旋流器组作业 17 21332 2.2.5 弱磁选别作业 19 15954 2.2.6