德国麦能仪表poolmeter_03_06.pdf

PoolMeter™ Model 512T5D Operation Manual 8 March 06 ACCURACY • RELIABILITY • SIMPLICITY Water Quality Instrumentation Accuracy •Reliability • Simplicity DESCRIPTION 4. Press the black button. 5. Read the dial value indicated by the pointer to determine This manual describes your Myron L 512T5D “Dual” Range parts per million (ppm), Total Dissolved Solids (TDS) or PoolMeter™, tells you how to use it, and tells you how to keep it Minerals. working accurately for many years. 6. If the pointer goes off the scale to the right, try Range Your PoolMeter is a compact instrument that operates on Doubling (see FIELD CALIBRATION) or an RE-10 Range the principal of electrical conductivity. It will quickly determine Extender (see ACCESSORIES). the ppm/Total Dissolved Solids of almost any solution. The PoolMeter converts electrical conductivity directly into parts NOTE: per million (ppm) of Total Dissolved Solids (TDS) AND ppm of When you are finished using the meter, RINSE THE CELL Minerals (Sodium Chloride/NaCl). CUP with clean water, preferably distilled or deionized. It is 85 x 129 x 126 mm/3.4 x 4.5 x 4.0 in. and weighs less than 0,45 kg/1 lb. The PoolMeter is completely self-contained. TEMPERATURE COMPENSATION The built-in cell is automatically temperature compensated to For very hot or very cold solutions, let the three rinse 25°C/77°F when measuring within the range of 10° to 71°C/50° samples each remain in the cell cup for several seconds. to 160°F. It is powered by a 9 volt battery that