德国麦能仪表ppm_pDS_manual.pdf

PPM pDS METERS Operation Instructions User Manual for Models T2/pH T6/pH 6115 Corte del Cedro Carlsbad, CA 92009-1516 USA Tel 760-438-2021 Fax 800-869-7668 / 760-931-9189 pH/Conductivity Instrumentation Accuracy • Reliability • Simplicity DESCRIPTION The pictures in this manual show the major operating parts of your Myron L pDS Meter. Handle your pDS Meter and identify these This manual describes your Myron L pDS meter, tells you how to parts to become familiar with it. use it, and how to keep it working accurately for many years. Myron L pDS Meters are compact, light-weight, self-contained conductivity/pH meters. They contain a built-in sample cell with a replaceable pH sensor. Models T2/pH and T6/pH convert conductivity values directly to Total Dissolved Solids (TDS), and have dials calibrated in parts per million and in pH units. They will quickly determine the TDS and pH of almost any solution. Both are 3.4 x 4.5 x 4.0 (85 x 129 x 126mm) and weigh less than one pound (.45 kg). pDS Meters are completely self-contained. The built-in cell is automatically temperature compensated from 50° to 160°F (10° to 71°C). They are powered by a 9 volt transistor battery good for at least 2000 tests, or one year shelf life. MODEL PARTS PER MILLION (PPM) pH RANGE RANGES T2/pH 0-50, 0-500, 0-5000 ppm TDS 2-12 pH T6/pH 0-5000 ppm TDS 2-12 pH ACCURACY (Both Models) TDS: ±2% of full scale (ppm NaCI standard only); Ground water (442 standard) values are approximate because of varying sample TDS compo