德国堡盟仪表baumer-LBFS_EN.pdf

Level Switch LBFS R Wetted parts in stainless steel and PEEK 74 - 03 Compact design Precise switching point with no requirement for calibration Process temperature -40 ... 115°C Measures media with DK-values 1.5 LED switch indicator Maintenance free Suitable for media separation measurement Configurable by FlexProgrammer 9701 ATEX approval for gas and dust Description The Level Switch LBFS designed to detect levels in tanks, media The measurement is precise and unaffected by the mounting position separation and provide empty-pipe detection or dry-run protection for in the tank. In the Flex-software a compensation for foam, bubbles and pumps. condensate as well as sticky media can be set. A high frequency sweep signal is radiated from the sensor tip into the The Flex-software also features an adjustment facility making the user tank. The media will act as a virtual capacitor, which together with a able to adjust the sensor to a specific media. coil in the sensor head, will form a circuit creating the switch point signal. This virtual capacitance will depend of the di-electric value of The Level Switch LBFS measures liquids such as water and oil. Even the media. dry medias can be measured, eg. coal dust or plastic granulate. Level Switch LBFS can be delivered with PNP output as well as NPN Two output signals are available, Normally Open (NO) and Normally