热敏电阻NTC 100k 规格书.docVIP

Scope This specification deals with shape, dimensions, characteristics, inspection standard etc. 本说明包括产品外形尺寸、性能及出厂检验标准，产品型号、规格。 Specifications JGED-104-3950-5 NTC Thermistor Resistance value B value 100 kΩ ±5% 3950 ±1% B25/50 Shape and dimension外形尺寸(Unit：mm) Glass encapsulatedChip0.5 Glass encapsulated Chip 0.5 28 4.0 28 0.8 2.0 4、Electrical characteristics电性能 Item 项目 Symbol符号 Test Condition 测试条件 Min. 最小值 Nor. 正常值 Max. 最大值 Unit 单位 a Resistance at 25°C 25°C R25 25±0.05°C 95 100 105 kΩ b Bvalue B值 B25/50 B= 3910 3950 3990 k c Insulation resistance 绝缘电阻 / 500VDC 100 / / MΩ d Thermal time constant 热时间常数 τ in still air 静止空气中 / / 20 sec e Thermal dissipation constant 热耗散系数 δ in still air 静止空气中 2.0 / / mw/°C f Operating temperature range 使用温度范围 / / -50 / 300 °C 5、Reliability可靠性 Item 项目 Specification 技术说明 Method of Examination 测试条件及方法 5.1 high Temp. storage高温存放 *ΔR25/ R25≤±2% After storeage at 250°C for 1000hrs 250°C环境中放置1000小时 5.2 Low Temp. storage 低温存放 After storeage at -40°C for 1000hrs -40°C环境中放置1000小时 5.3 High temperature and humidity 耐湿热 After storeage at 60°C 95%RH for 1000hrs 60°C 95%RH存放1000小时 5.4 Thermal shock 耐温度冲击 *ΔR25/ R25≤±2% 100 cycles of following sequence -40°C 10min.---5min. room temp. ---200°C 10min.---5 min. room temp. 经历如下温度循环100次 -40°C10分钟---常温5分钟---200°C10分钟---常温5 5.5 Vibration 振动 * no visible damage 无损伤 *ΔR25/ R25≤±2% After vibrate test , Frequence 10-500Hz 15min.max amplitude 1.5mm ,in X and Y directions 振幅1.5mm频率10Hz到500Hz 元件受振动试验X、Y方向各15分钟 5.6 Pulling 引线强度 * no visible damage 无损伤 *ΔR25/ R25≤±2% After applling a force of 9.8N in the axial direction of thermistor, and maintain the force for 60sec. 引线沿轴向施加9.8N拉力，并持续60秒 5.7 Fall down 跌落 * no visible damage 无损伤 *ΔR25/ R25≤±2% After dropped freely onto wood floor from 1 meter height for 10 times 从1米高度自由落下10次在规定的木板上 6、Outgoing Inspection出厂检验 6.1 The product shall be inspected at every delivery lot inspection items, sampling quantities and sampling acceptable standard are as follows. 产品批量出厂前