中国铝板生产概况.ppt

Aluminum plate*** Aluminum plate production in China  Content ■中国铝板轧制工业概况 ■国内铝板供需状况前瞻 ■铝板市场 ■铝板企业 ■西南铝业集团 ■东北轻合金 ■爱励国际(Arel) ■南山轻合金 亚洲铝业  Aluminum plate production in china summary 9 4300mm of SWA and 3950mm of NELA were commissioned in 2010, capacity of each is 50,000 ton/a 4500mm of NWA would be commissioned after 2012. It is estimated that the capacity of thick Aluminum plate be 140,000 ton/a or more by 2012; Q The consumption of Aluminum plate or strip will be 6 million ton in 2010, net export 660,000 tons and production 5.95 million tons ◆ Aluminum Companies ◆SwA(西南铝:4300mm, Products:6~150mm; Capacity of thick plate:50,0tons ◆NELA(东北轻合金:3950mm; Capacity of thick plate:5000tons; Q Arelis: cooperated with Dingsheng Aluminum on establishing a venture; the design capacity of plate and strip is 150,000 tons, and it would be commissioned in 2012 Nanshan light allovt(南山轻合金: capacity of plate and strip:750,000ons; thickness 10~150mm ◆ Asia aluminum(亚洲铝业): a new project just was commissioned in Dec.2010, which should have commissioned in the end of 2007. The capacity of the first phase project is 400,000 tons of plate and strip, the production of it would be 150,000-200,000 tons in 2011. The(3- products of the second phase are emphasis on super high quality thick plate for aerospace  中国铝板轧制工业概况 铝厚板生产现况 ◆大多数带板厂不生产厚板(厚度不小于6mm),即使生产其产量也不占主导地位;2007年,在铝板带总产量中 板的量还不到3.5%所有的薄板带都是冾轧生产。厚板应用领域:航空工业、窜波工业、铁路运输、化工领域等 ◆到2010年我国捋拥有铸锭热连轧生产线9粲,单机架可逆式热轧机(辊面宽度≥1200mm)29台,厚板专用热轧生 线2条(1粲4300mm m);:双辊式铝带坯铸轧生产线约500台;现代化的铝带冷连轧生产线4粲(5机架1 条、双机架的3条)、单机 冷轧机(辊面2800mm)245台(其中CVc型的11台,其他的高技术冷轧机6台);:四 辊铝箔轧机(辊面宽度≥ 30台,其中2000mm级的34台 ◆到2012年中国将有4粲专用厚板轧机 西南铝业(集团)有限责任公司:4300mm轧机; 中铝东北轻合金有限责任公司:3950mm轧机 龙铝业有限公司:1600mm二辊热轧机 精美铝业有限公司:3000mm热轧机 ◆截止 以生产1 m 底,中国拥有1300mm以上的热轧机50台左右,其中小于2000mm的大型热轧机17台,他们都可 3000系、4000系、5000系铝合金厚板,但是2000系、7000系铝合金厚板只有以上四家企业能生产 因为需要 理及时效处理 ◆热处理不可强化铝合金厚板(不大于20mm)只要有热轧机及辊矫机就可以生产,这类厚板的生产能力很大。而热 处理可强化铝合金厚板的生产能力则决定于固溶处理炉及拉伸矫直机的通过能力到