实验大楼结构计算书.docVIP

　　　　　 　　 　 　 　 　 　 　 　　　 　　 毕业设计（论 文）计算书　 　　 　 　　　 　　 　 　 　　　 　　 题 目:九江市某高校实验大楼　 (Some colleges and universities experiment buildings)　 系 别：土木与建筑工程学院　 专 业：建筑工程　 姓 名：　　　 班 级：2008级　 学 号: 　 指导教师：　 　　 　 二零一二年六月　　 　　　 　　 　　　 　　　 摘 要　 　 本次毕业论文的题目是九江市某高校实验大楼。首先对该工程进行了简要的概述包括：建筑总面积，结构方式，层数等等。然后进行了方案的设计，包括五个部分:　　　 1）根据建筑规范绘制满足实验大楼功能要求的建筑图　　 2）根据地质报告和地震信息初步进行设计，即结构选型，结构布置，截面尺寸估算 　　 3）计算相关荷载恒载、活载、 风载等作用下柱子，梁，板的基础等的配筋　　 4）通过PKPM验算和复核结构的整体稳定性，安全性，适用性，耐久性等是否满足结构功能要求　 5）绘制施工图，绘制各层施工图包括 柱子，梁，板，基础等的配筋及屋面，楼地面的施工大样图　　 　　 关键词：功能要求 结构选型 结构分析 施工图 复核　 　　 　 　 　 　　 　　 　　　 　　　 　　　 Abstract　 The title of the bachelor degree is design of Some colleges and universities experiment buildings of Jiujiang .Firstly, the outline of this project including area, load-carrying frame , skin , floors is introduced. This design involved five distinct phase of work 　 1) draw site plan to satisfy the requirement for teaching, doing experiments and so on. 　　　 2) According to the earthquake of geological report and the standard of structure, suitable sizes of beams columns, concrete member sizes are chosen. 　　　 3) The criteria for acceptable performance is determined according to the dead loads (structure and known, permanent installations) during this process.　　　 4)Analysis of structures is conducted to ensure stability, find the member force to reisited and determine deflections. 　　 5) Safety at working load is be calculated through the special program 　 PKPM in computer . It is done through drawings, which indicate all basic dimensions, materials member sizes, anticipated loads in design.　　 　　　 Key words: project requirements; material selection; structural analysis;construction map;check　　 目 录　 摘要·······························································1　 前言·······························································4　 第一章、建筑设计部分············································5　 1.1 概述·········································