焊接国际标准--原版英文 original English.docVIP

焊接国际标准--原版英文 original English ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES ? IPC-A-610D Acceptability of Electronic Assemblies IPC-A-610D February 2005 A standard developed by IPC Supersedes A-610C 3000 Lakeside Drive, Suite 309S, Bannockburn, IL 60015-1219 January 2000 Tel. 847.615.7100 Fax 847.615.7105 .ipc.org The Principles of In May 1995 the IPC’s Technical Activities Executive Committee TAEC adopted Principles of Standardization Standardization as a guiding principle of IPC’s standardization efforts. Standards Should: Standards Should Not: ? Show relationship to Design for Manufacturability ? Inhibit innovation DFM and Design for the Environment DFE ? Increase time-to-market ? Minimize time to market ? Keep people out ? Contain simple simpli?ed language ? Increase cycle time ? Just include spec information ? Tell you how to make something ? Focus on end product performance ? Contain anything that cannot ? Include a feedback system on use and be defended with data problems for future improvement Notice IPC Standards and Publications are designe