道达尔勘探开发 标准规范 GS_EP_SAF_260_EN.pdf

Exploration Production GENERAL SPECIFICATION SAFETY GS EP SAF 260 Design of High Integrity Protection Systems (HIPS) Addition of EP root to document identification and improved 02 10/2005 the text to be in line with GS EP SAF 261 01 02/2004 Fully revised 00 04/2001 First issue Rev. Date Notes This document is the property of Total. It must not be stored, reproduced or disclosed to others without written authorisation from the Company. GS_EP_SAF_260_02_EN.doc Exploration Production General Specification Date: 10/05 GS EP SAF 260 Rev: 02 Contents 1. SCOPE 3 2. APPLICABILITY 3 3. REFERENCE DOCUMENTS3 3.1 Standards Professional Documents and Codes 3 4. TERMINOLOGY AND DEFINITIONS5 5. HIPS DESIGN PROCEDURE9 5.1 Formal Approval of a HIPS 9 5.2 Preliminary HIPS dossier 9 5.3 HIPS dossier 9 5.4 Company approval 10 6. HIPS BASIS OF DESIGN 10 6.1 General 10 6.2 Functional requirements 12 6.3 HIPS Detail design specification 13 6.4 Dynamic response and instrument settings 14 7. CALCULATION REQUIREMENT 15 7.1 Probability of Failure on Demand 15 7.2 Component SIL 15 7.3 Reliability achievement 15 8. RELIABILITY DATA 17