车灯用热熔胶水技术指标.doc

车灯用热熔胶水技术指标 Auto-lamp Hot Melt Adhesive Specification PUR-750-2是一种100％固体，湿度固化的热熔胶，能为粘结困难的面提供优质的粘合，如PC、PP、PBT、ABS、BMC等。PUR-750-2能快速释放很强的处理黏合剂，并且固化以提供优异的耐热和防水寿命。 PUR-750-2 is a 100% solids, moisture-curing hot melt adhesive designed to provide excellent adhesion to difficult surfaces, such as PC, PP, PBT, ABS, BMC, etc. PUR-750-2 delivers strong handling bonds rapidly, and cures to provide excellent heat resistance and water resistant durability. 需要具备的主要特性 Main Characteristics Required ·良好的粘结性，可粘结多种基材（如PP、PC、ABS）； Good adhesion and can stick many base materials (eg. PP, PC, ABS); ·纯固体，无腐蚀性； Pure solid without corrosion; ·良好的耐高低温性能，能在-25℃-150℃长期工作； Excellent high/low temperature resistance and can work for a long time under -25℃-150℃. ·优异的耐候性、密封性、耐腐蚀性、耐老化性、耐蠕变、温度冲击； Excellent weather resistance, sealing, corrosion resistance, aging resistance, infiltration and temperature stroke resistance; ·固化速度（可进行操作时间－气密0.1MPa）：涂胶后3分钟能够100％进行需要性试验； Curing speed (Time for operation – leaking 0.1MPa): 3 minutes after glue dispensing, 100% test required can be made. 要求 Requirements 外观 Appearance 产品应无分层、无开裂、无不均匀表面、细腻的黑色块状固体。 No layering, crack, uneven surface for the product and it should be smooth black solid block. 物理力学性能 Physical Mechanics Performance 产品物理力学性能应符合表1要求。 Physical mechanics performance should meet requirements in Table 1. 表 1 产品物理力学性能 Table 1 Physical Mechanics Performance of Products 类型 Type 要求 Requirements 剪切面测试 Lap shear @22℃ 1.725KPa 热强度测试 Hot Strength @88℃ 340KPa 冷强度测试Cold Strength -4℃ 2050KPa 100％耐湿性测试 Humidity resistance test 250小时/hours@38℃ 1.725KPa 耐温性测试 Temperature resistance test 250小时/hours @88℃ 1.725KPa 耐盐雾测试 Corrosion test 250小时/hours 1.725KPa 耐老化测试 Weatherometer 1000小时/hours 1.200KPa