计算机专业英语 Chapter2[借鉴].pptVIP

After the microprocessor allows sufficient time for memory to decode the address and access the requested memory location, the microprocessor asserts a READ control signal. The READ signal is a signal on the control bus which the microprocessor asserts when it is ready to read data from memory or an I/O device. (Some processors have a different name for this signal, but all microprocessors have a signal to perform this function.) Depending on the microprocessor, the READ signal may be active high (asserted - 1) or active low (asserted - 0). 当微处理器为存储器留出充足的时间来对地址译码和访问所需的存储单元之后，微处理器发出一个读（READ）控制信