口腔解剖生理学：牙体外形识别、测量与描绘.pdfVIP

该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： / 牙体外形识别、测量与描绘 • 目的和要求 – 观察离体牙，掌握解剖特点 – 掌握游标卡尺使用和离体牙测量方法 – 掌握牙体轮廓的描绘的方法 • 实验内容 – 认识观察离体牙 – 测量离体牙 – 描绘牙体轮廓 • 应用术语 – 中线 – 牙体长轴 – 接触区 – 外形高点 – 线角 – 点角 – 牙体三等分 • 牙冠面的名称 – 唇面 • 颊面 – 舌面 • 腭面 – 近中面 – 远中面 – 牙合面 • 切嵴 • How to measure a tooth – Dimesions – 颈曲度 About Boley Gauge • It is a caliper-type gauge graduated in millimetres used to measure the thickness of various dental materials. • A caliper is a device used to measure the distance between two opposing sides of an object Y mm Contribute by: Gary Neel Ragoo Boley Gauge Fixed Scale Sliding Scale How to use it? • Step 1: You begin by looking at the fixed scale where the bold face numbers are in cm (therefore the 1 and 2 on the fixed scale represent 10mm and 20mm respectively.) How to use it? • Step 2: Locate the position of the Zero Mark • The zero mark is the first tick mark on the sliding scale. Zero Mark How to use it? • The zero mark determines the whole mm amount depending on where it is located in relation to the fixed scale. • E.g- if its between the 10