基于Matlab地IIR数字滤波器设计(论文).docx

摘 要 在现代通信系统中，由于信号中经常混有各种复杂成分，所以很多信号分 析都是基于滤波器而进行的， 而数字滤波器是通过数值运算实现滤波， 具有处理 精度高、稳定、灵活、不存在阻抗匹配问题，可以实现模拟滤波器无法实现的特 殊滤波功能。 数字滤波器根据其冲激响应函数的时域特性， 可分为两种， 即无限 长冲激响应 (IIR) 数字滤波器和有限长冲激响应 (FIR) 数字滤波器。实现 IIR滤波 器的阶次较低，所用的存储单元较少，效率高，精度高，而且能够保留一些模拟 滤波器的优良特性，因此应用很广。 Matlab软件以矩阵运算为基础，把计算、可 视化及程序设计有机融合到交互式工作环境中， 并且为数字滤波的研究和应用提 供了一个直观、高效、便捷的利器。尤其是 Matlab中的信号处理工具箱使各个领 域的研究人员可以直观方便地进行科学研究与工程应用。 本文首先介绍了数字滤 波器的概念， 分类以及设计要求。 接着利用MATLA函B 数语言编程， 用信号处理图 形界面FDATool来设计滤波器以及 Sptool 界面设计的方法，并用 FDATool模拟IIR 数字滤波器处理信号。重点设计 Chebyshev I 型和Chebyshev II 型数字低通滤波 器, 并介绍最优化设计。 【关键字】 IIR 滤波器 FDATool Sptool Simulink 重庆邮电大学高教自考毕业设计（论文） ABSTRACT In modern communication systems, Because often mixed with various signal complex components,So many signal analysis is based on filters, and the digital filter is realized through numerical computation, digital filters filter with high precision, stability and flexibility , dont exist, can realize the impedance matching simulating the special filter cannot achieve filter function. Digital filter according to its impulse response function and characteristics of the time can be divided into two kinds, namely the infinite impulse response(IIR) digital filter and finite impulse response (FIR digital filters). The order of realizing IIR filter is used, low and high efficiency less storage unit, high precision, and can keep some simulation characteristics of filter, so it is widely used. Matlab software based on matrix computation, the calculation, visualization and program design of organic integration to interactive environment for digital filter, and the research and application of provides an intuitive, efficient and convenient tool. Especially in the Matlab signal processing to all areas of research toolbox personnel can easily for scientific research and engineering application. This paper introduces the concept of digital filter, classification and design requirements. Then using MATLAB language programming, with functions of signal processing FDATool graphical interf