基于PLC的花样喷泉控制新版专业系统设计.docVIP

基于PLC花样喷泉控制系统设计 基于PLC花样喷泉设计 摘要 针对传统喷泉控制系统一旦设计好控制电路，就不能随意改变喷水花样及喷水时间等问题，本设计结合西门子 S7-200 可编程控制器设计能适应不一样季节、不一样场所喷水要求目标花样喷泉系统。花样喷泉控制系统关键任务就是改变喷泉喷水样式，以达成有规律改变喷泉喷水样式目标。按下开启按钮，喷泉装置开始工作，按下停止按钮，喷泉控制装置停止工作。喷泉工作方法由花样选择开关和单步∕连续开关决定。当单步∕连续开关选择单步时，喷泉只能根据花样选择开关设定方法，运行一个循环；当单步∕连续开关选择连续时，喷泉根据花样选择开关设定方法，运行多个循环，直至按下停止按钮。花样循环方法选择开关用于选择喷泉喷水花样，本文设计四种喷水花样循环。PLC控制系统体积小、功效强、可靠性高，且含有较大灵活性和可扩展性特点。用PLC花样喷泉控制系统，不仅实现了自动转换花样喷泉喷水样式，提升了系统可靠性和安全性，而且，美化了我们生活环境，使我们生活环境愈加安逸、舒适。所以PLC控制系统含有一定工程应用和推广价值。 关键词：喷泉，PLC控制，花样喷泉系统 The pattern design based on PLC fountain Abstract In traditional fountain control system design good control circuit, once cant change pattern and water spraying time such issues, the design with Siemens s7-200 PLC design can adapt to different season , different occasions of hydraulic requirements the pattern of the fountain system purpose. Figure fountain control system is the main task of the change of style, water fountain in order to achieve regular change of the water fountain style purpose. Press the start button, and fountains device started to work, and press the stop button, fountain control device to stop working. Work by pattern choice fountain way switch and a single step/continuous switch decision. When a single step/continuous switch choose single step, fountain can only choose switch is set according to the pattern, run a cycle way; When a single step/continuous switch choice, according to the pattern for fountain switch selector way, operation DuoGe circulation, press the stop button until. Figure cycle way choice to select a fountain of hydraulic switch pattern, the paper presents the design of four kinds of water spray pattern cycle. PLC control system small volume and powerful function, high reliability, and has a greater flexibility and expansibility characteristic. PLC control system, and designs fountain not only realized the automatic conversion pattern fountain of hydraulic style, improve the reliability of system and security, and, beautification our