英国焊接标准.doc.docxVIP

英国焊接标准 (BS welding standards) ANSI | BS | DIN | EN | GB| ISO | JIS | NF | DIC 编号 中文名称 英文名称 栅栏 . 链节和焊接筛网的防 Fences - Specification for BS 1722-10-2006 anti-intruderfences in chain 盗栅栏用规范 link and welded mesh Specification for design and BS 1894-1992 焊接结构的电热锅炉的设 manufacture of electric 计和制造规范 boilers of welded construction 焊接结构的壳式锅炉的设 Specification for design and BS 2790-1992 manufacture of shell boilers 计和制造规范 of welded construction 碳钢薄板和带材规范 Specification for carbon steel sheet and strip BS 2S 510-1970 (430/540 MPa)( 适用于焊 (430/540 MPa) (suitable for 接 ) welding) 深拉碳钢薄钢板和带材的 Specification for deep drawing carbon steel sheet BS 2S 511-1970 规范 (280/400 MPa)( 适用 and strip (280/400 MPa) 于焊接 ) (suitable for welding) Specification for 碳锰钢薄板和带材规范 ( 淬 carbon-manganese steel sheet BS 2S 514-1969 火和回火条 and strip (for use in the 件 :77/100MPa)( 适用于焊 hardened and tempered 接 ) condition: 770/1000 MPa) (suitable for welding) Specification for 碳锰钢薄板和带材规范 ( 退 carbon-manganese steel sheet BS 2S 515-1969 火的 )( 退火条 and strip (softened) (for use 件 :46/59MPa)( 适用于焊 in the softened condition: 接 ) 460/600 MPa) (suitable for welding) BS 2S 92-1964 飞机材料规范 . 碳锰钢 ( 适 Specification for aircraft 用于焊接 )(40/55 吨力 / 平 material - Carbon-manganese 方英寸 ; 限定等圆断面 4 英 steel (suitable for welding) 寸 ) (40/55 tonf/sq in: limiting ruling section 4 in) Specification for 18/10 19/10 铬- 镍耐腐蚀钢管材 chromium-nickel BS 2T 66-1980 规范 ( 铌稳定 corrosion-resisting steel 的 :550MPa)( 可焊接 ) tube (niobium stabilized: 550 MPa) (weldable) Specification for cold drawn 冷拉 18/10 铬- 镍耐腐蚀钢 18/10 chromium-nickel BS 2T 68-1980 管材规范 ( 铌稳定 corrosion-resisting steel 的 :800MPa)( 可焊接 ) tube (niobium stabilized: 800 MPa) (weldable) Steel pipes and tubes for pressure purposes: ferritic 承压钢管 . 具有规定高温特 alloy steel with specified BS 3604-2-1991 性的铁合金钢 . 第 2 部分 : elevated temperature 纵向电弧焊接管规范 properties - Specification for longitudinallyarc welded tubes Specification for steel pipe BS 3799-1974 石油工业用钢管配件、 螺旋 fittings, screwed and 管接头