Presentation 156 PA建模和数字预失真的自动设计和验证流程 Automatic Design and Verification Flow of PA Modeling and Digital Pre-Di... (1).pdfVIP

Automatic Design and Verification Flow of PA Modeling and Digital Pre- Distortion Keysight Technologies Content • Why Digital Pre-Distortion (DPD)? • PA Modeling • DPD Hardware Implementation • Summary PA Modeling DPD Solution Digital Pre-Distortion PA Modeling DPD Solution Why Digital Pre-Distortion? OUTPUT Non-Linear Property of PA POWER LINEAR GAIN Psat INPUT POWER Peak-to-Avg Power Ratio PA Modeling DPD Solution Why Digital Pre-Distortion? • Requirements of Modern communication systems (LTE, WLAN802.11ac…): • PA operates with high power-added efficiency (PAE) • Signal: high peak-to-average power ratios (PAPR). • High PAE is achieved when the RF power amplifier (PA) is driven towards saturation. • Operation near saturation inherently results in higher signal distortion. High Signals with High Spectral PAE high PAPR Efficiency Higher High “Back off” the Distortion drive levels Drive levels levels Conflicting requirements PA Modeling DPD Solution Solution with DPD CFR