实训基地 校外实训基地 哈克流变仪在聚合物加工和表征方面的应用——MiniLabMiniJet.pptVIP

Continous Production PMMA/Cellulosis blends for tablet coating ?180 grs/hr or thin filaments of 100μm new HAAKE MiniJet Numerical controlled 2 Temperatures controlled Pressure controlled (0.1 bar) Procedure controlled1. Injection pressure duration,2. Post pressure duration All parameter can be stored Language: English, German Units: bar, psi - °C, F, K Improved handling No pressing lever necessary Easy filling of pellet samples Increased performance Same injection pressure form 40% less feeding pressure HAAKE MiniJet – vertical alignment Melt temperature 400 °C Mould temperature 250 °C Injection pressure 1200 bar Electrical power 230V / 110V Max air pressure 10 bar Dimensions 300x460x71060 kg Specifications: MiniJet – forget 16 bar !! Heated Cylinderd1, P1 Heated mould Pneumatic CylinderD0,, P0 Sample Injection pressure (P1) describes capabilities of machine, Feeding pressure (P0) describes requirement of machine. Injection pressure remains the same: 1200 bar Cylinder diameter (D0) increased from 100mm to 125mm Pressure requirement goes down (from 16 to 10 bar) HAAKE MiniJet – Micro Injection Moulding The reservoir can be connected with the Minilab to fill in the melt Or direct fill in of pellets into the reservoir chamber HAAKE MiniJet – Micro Injection Moulding Specific mould design depending on your task for instance Tensile testing specimen Customized moulds e.g. for tablets for bioavailability studies Tensile testing - Colourmatching - Surface QC HAAKE MiniJet – Micro Injection Moulding Produce Specimens !! Tensile bar according ASTM D 638 Typ V Tensile bar Tensile bar according ISO 527 – 2 – 5A H=3,2 H=1,5 H=2 Part number: 557-2299 Part number: 557-2290 Part number: 557-2298 HAAKE MiniJet – Micro Injection Moulding Part number L W H 557-2295 60 10 1 557-2296 Customized (on request) Tensile testing - Colourmatching - Surface QC Produce Specimens !! Disk DMA - Bar Part number ? D H 557-2291 20 1,5 557-2292 25 1,5 557-2293 35 1,5 557-2294 C