无损检测缺陷剖析.pptVIP

Chapter 2 Defect Analysis 本章提要: 缺陷分析是无损检测的技术基础 主要解决两方面的问题: 是弄清 defects, classification、 property and harmfulness 二是分析 the causes of defects,以便有效地 dentin defects and eliminate defects,提高工艺质量 本章重点讲授 defects, classification and harmfulness 缺陷的产生原因应结合《材料成型原理》课程内容深 入理解与总结 最后,对 Commonly used detection methods作简要 介绍  2.1 Concept and classification of process defects 2.1.1 Concept of process defects (1) What are the process defects? 在材料加工成型过程中,经常会出现 某种或某些不合乎质量要求的 appearance defect, property defect and organization defect 和更为严重的 internal geometric defect(如 cracks、 pores、 inclusion