最新设备方案书.docxVIP

EJ入PIN机 The protocol for EJ terminals insertion machine 设 备 方 案书 设计目标与要求(design target and specification) 1 .设计目标(design target) 此机台的设计目标是按照客户提供的胶芯弹片共三种零件 装配起来，然后检测成功与否后自动排除不良的自动化过程，实现产 品的连续、高效、高质量的自动化生产。 The function of this machine is to insert the M terminal and SCC terminal into the bobbin, then to probe it is ok or not good(NG), if it is not good, then push the not good products out of the line. The machine should be able to run continuously, high efficiently, and in high quality. 2．设计要求 (design specification) 根据客户提供的产品样品，我司对此设备拟定的设计要求如下： (according to the customers requirement and the s