收音机测试方法_FM_AM_DAB_HD_Radio.pdf

收音机测试 FM/AM测试 DAB 测试 HD Tuner 测试 FM/AM Test Measurement Setup HU The AM/FM Dummy Audio Analyzer setup 20k LP Filter FM/AM Test Test Items-SNR SG setup FM Modulation: 1 KHz mod. 22.5 KHz deviation RF level: 66dB Measuring frequency: 98.1 MHz AM Modulation: 1 KHz mod. 30% deviation RF level: 66dB Measuring frequency:999 KHz Test Method 1. Set 0 dB at the output with above SG setup 2. Remove modulation, measure output in dB: N 3. SNR result is 0-N. FM/AM Test Test Items-Usable Sensitivity SG setup FM Modulation: 1 KHz mod. 22.5 KHz deviation RF level: 66dB Measuring frequency: 98.1 MHz AM Modulation: 1 KHz mod. 30% deviation RF level: 66dB Measuring frequency:999 KHz Test Method 1.Reduce the input level until the SNR result is 26dB 2. Usable sensitivity is the SG output level Note US is the ability of the tuner to receive very weak signal US result mainly depends on the PCB layout and the Coil used in FM front end circuit FM/AM Test Test Items-Seek Sensitivity SG setup FM Modulation: 1 KHz mod. 22.5 KHz deviation RF level: 66dB Measuring frequency: 98.1 MHz AM Modulation: 1 KHz mod. 30% deviation RF level: 66dB Measuring frequency:999 KHz Test Method 1.Modify the SG output level, to check if the seek up or seek down can stop at Frf 2.Seek sensitivity is the SG output level FM/AM Test Test Items- THD SG setup FM Modulation: 1 KHz mod. 22.5 KHz deviation RF level: 66dB Measuring frequency: 98.1 MHz AM Modulation: