电磁场与电磁波：8 Plane Wave Propagation.pptVIP

* Ht continuous at z=0 interface: This is valid for all y. So we have: * * Reflection and transmission coefficients for parallel polarization According to Et continuous at z=0 interface, we can obtain: * When , the reflection coefficient becomes zero. When ?1 ?2, if , there is no transmitted wave. Brewster angle: Total Reflection: * A uniform plane wave propagating in a dielectric medium ( ) strikes normally upon a perfect conductor. If the angular frequency of the wave is 96G rad/s and the amplitude of the incident E field at the interface is 100V/m , obtain expressions for the incident, reflected, and total fields in the dielectric medium. Ex. * The electric field intensity of a uniform plane wave in air is given as Determine the corresponding H field, the phase constant, the wavelength, the velocity of propagation. If it strikes normally on the surface of a perfect conductor at z=0, write expressions for the incident, reflected, and total fields, What is the surface current density on the surface of the conductor? * Problems 8.7~10, 8.13~17, 8.22~25, 8.27~34 * Ex. Find the polarization of the following waves (4) (1) RHCP (2) LP (3) LHEP RHCP * * RHCP ? * LHCP ! * Ex. The electric field intensity of a uniform plane wave in free space is given by Determine (a) f, (b) H, (c) S, (d) the polarization of the wave. Solution * (2) (4) RHCP (3) * * 8.9 Normal Incidence of Uniform Plane Waves 8.9 Normal Incidence of Uniform Plane Waves 8.9.1 Conductor-Conductor Interface * Incident wave: Reflected wave: Ttransmitted wave: * Total field in medium 1: Boundary conditions: * 8.9 Normal Incidence of Uniform Plane Waves 8.9.1 Conductor-Conductor Interface Reflection coefficient Transmission coefficient * Averaged power flux density in transmitted wave: * Averaged power flux density in medium 1: Detailed equations can found in the textbook. The third term is due to t