机械原理英文课件：experiment.pptVIP

Practice One Measure the height and diameter of shaft using straight steel ruler （钢直尺）; Measure the diameters of shafts and holes using vernier caliper(游标卡尺) and microcalliper（千分尺或螺旋测微器）, respectively. Measure the heights and depths of shafts and holes using height vernier caliper(高度游标卡尺) and depth vernier caliper（深度游标卡尺）. Straight Steel Ruler 钢直尺 Vernier Caliper游标卡尺 Height Vernier Caliper高度游标卡尺 Depth Vernier Caliper Microcaliper Lab Requirements All instruments in Lab of Tolerance are precision ones; You must wear gloves when using the instruments since your sweat will damage them; All instr