AWS D10.10D10.10M-1999(R2009)管道焊缝局部加热的推荐实践（中英文对照可编辑版）.docx

AWS D10.10/D10.10M:1999 (R2009) An American National Standard Recommended Practices for LocalHeating of Welds in Piping and Tubing AWS D10.10/D10.10M:1999 (R2009) An American National Standard Approved by the American National Standards Institute October 20, 1999 Reaffirmed: May 5, 2009 Recommended Practices for Local Heating of Welds in Piping and Tubing 3rd Edition Supersedes AWS D10.10/D10.10M:1999 Prepared by the American Welding Society (AWS) D10 Committee on Piping and Tubing Under the Direction of the AWS Technical Activities Committee Approved by the AWS Board of Directors Abstract This standard provides information on recommended practices, equipment, temperature control, insulation, and advantages and disadvantages for the methods presently available for local heating of welded joints in pipe and tubing.  Statement on the Use of American Welding Society Standards All standards (codes, specifications, recommended practices, methods, classifications, and guides) of the American Welding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of the American National Standards Institute (ANSI). When AWS American National Standards are either incorporated in, or made part of, documents that are included in federal or state laws and regulations, or the regulations of other governmental bodies, their provisions carry the full legal authority of the statute. In such cases, any changes in those AWS standards must be approved by the governmental body having statutory jurisdiction before they can become a part of those laws and regulations. In all cases, these standards carry the full legal authority of the contract or other document that invokes the AWS standards. Where this contractual relationship exists, changes in or deviations from requirements of an AWS standard must be by agreement between the contracting parties. AWS American National Standards are developed through a consensus standards development process t