信号自动化控制.pdfVIP

车站信号自动控制系统的设计（论文） 摘要 目前，我国铁路车站信号自动控制系统普遍采用的是 6502 电气集中系统， 该系统不仅 高效、经济、可靠，更重要的是符合故障 -安全原则。本次设计从 6502 电气集中的两大主要 组成部分 —— 选择组和执行组入手，对一个双向四股道车站的信号自动控制系统进行设计。 其中包括对选择组的记录电路、 选岔电路、 开始继电器电路、 辅助开始继电器电路和终端继 电器电路等的设计； 对执行组的信号检查继电器电路、 区段检查继电器和股道检查继电器电 路以及进路锁闭电路和表示灯电路等的设计。 系统原理图被设计并附在论文后。 关键词：6502 电气集中； 信号自动控制系统； 执行组； 选择组 Design of Signal Automatic Control Systemin Railway Station ABSTRACTAt present, signal automatic control system in railway station is adopted and used by 6502 electricity concentration system in our country, which system is of not only efficiently, economy and reliability but also more important accord with the fault-safe principles. This design is started from two different constitutes primarily of 6502 electricity concentration--selection group and execution group, control system of a bi-direction four-route ways of railway station is designed according to requests. And then, the record circuit, the selection of branch circuit, the beginning of relay circuit, the assistant beginning of relay circuit and the terminal of relay circuit are included in selection group, they are designed. And then, the signal inspect of the relay circuit , the section inspect of the relay circuit and the inspect of the relay circuit are included in execution group and then are designed. It is designed and attached in the end of thesis that principle diagram.Keywords: 6502 electricity concentration; Automatic control system of signal; selection group circuit; execution group circuit; -- 作者：岩石 -- 发布时间： 2005-7-8 13:53:59-- 第 1 章 绪 论 随着铁路运输的发展需要和 科学技术的进步， 保证行车安全的措施逐步从管理措施向技术措施过渡， 直至发展成今天的 自动控制系统。 6502 电气集中联锁设备作为实现控制车站范围内的道岔