机务维修培训 29A3110_R00.pdfVIP

FROM : AIRBUS CUSTOMER SERVICES TOULOUSE TO : ALL A330 OPERATORS ALL OPERATORS TELEX - ALL OPERATORS TELEX SUBJECT: ATA29 - RAM AIR TURBINE - SCREW REPLACEMENT OUR REF: AOT A330-29A3110 dated 01 SEP 2009 1. AIRCRAFT AFFECTED This AOT applies to all A330 in service aircraft equipped with Hamilton Sundstrand Ram Air Turbine (RAT) Turbine-Lower Gearbox Assembly PN 766542 series and PN 1701401 series. NOTE: Operators have to distinguish the Ram Air Turbine (RAT) Module from the RAT Turbine-Lower Gearbox Assembly sub-assembly. If still equipped with the original RAT Turbine-Lower Gearbox Assembly from delivery, aircraft MSN 1024 and subsequent are not affected by this AOT. A Quality Survey addressed the following aircraft MSNs before delivery, MSNs 988, 990, 992, 994, 995, 996, 997, 998, 999, 1000, 1001, 1002, 1003, 1006, 1007, 1008, 1009, 1010, 1011, 1013, 1018, 1019, 1020, 1021, 1023. As a consequence, if the original Ram Air Turbine (RAT) Turbine-Lower Gearbox Assembly has not been replaced in service, the above-listed aircraft MSNs are not affected by this AOT. NOTE: It is the operators responsibility to check if the original RAT Turbine-Lower Gearbox Assembly is still fitted on aircraft. 2. REFERENCED DOCUMENTATION REF 1:CMM 29-21-45, IPL Fig. 2, item 40. REF 2:AMM TASK 29-24-00-720-801 Functional Check of RAT Using Ground Test Unit (MPD Task 292400-03) REF 3:Hamilton Sundstrand Service Bulletin ERPS06G-29-6 REF 4:AMM Task 29-24-00-869-801 Extension of the RAT on the Ground REF 5:AMM Task 29-24-54-000-801 Removal of the RAT Turbine-Lower Gearbox Assembly REF 6:AMM Task 29-24-54-400-801 Installation of the RAT Turbine-Lower Gearbox Assembly REF 7:AMM Task 29-24-00-869-802 Retraction of the RAT on Ground 3. REASON 3.1 FACTS Hamilton Sundstrand has discovered that some RAT were manufactured with non-conforming screws, Ref. 1 Hamilton Sundstrand CMM. The purpose of these screws is to attach the balance washers, which can have a