ft232r 开发模块原理.docxVIP

Future Technology Devices International Ltd UM232H Single Channel USB Hi-Speed FT232H Development Module Datasheet Document Reference No.: FT_000367 Version 1.1 Issue Date: 2011-03-21 1 Introduction The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signaling and protocols. The UM232H is ideal for development purposes to quickly prove functionality of adding USB to a target design. The UM232H is a module designed to plug into a standard 0.6” wide 28 pin DIP socket. The USB connection to a host system is via a mini-B USB connector. All components used, including the FT232H, are Pb-free (RoHS compliant). Figure 1.1 : UM232H USB to Serial/FIFO Development Module 1.1 FT232H The FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to Serial/FIFO IC. It can be configured in a variety of serial or parallel interfaces, such as UART, FIFO or FTDI’s MPSSE mode which can configure either of the following interfaces: JTAG, SPI and I2C. For MPSSE mode, there is also 14 bit-banging lines available along with the four interface lines. In addition to these, the FT232H supports a CPU-Style FIFO mode and a fast serial interface mode. It also introduces a half-duplex FT1248 interface that provides a flexible data communication and high performance interface between the FT232H device and external logic. For further details on the FT232H and the FT1248 mode, please refer to the FT232H datasheet and application note: AN_167 FT1248 Parallel Serial Interface Basics, located at the FTDI website. Table of Contents 1 Introduction 1 1.1 FT232H 1 2 Typical Applications 3 2.1 Driver Support 3 2.2 Part Numbers 3 2.3 Features 4 3 FT232H Features and Enhancement 5 3.1 Key Features 5 4 UM232H Pin Out and Signal Descriptions 7 4.1 UM232H Pin Out 7 4.2 Signal Descriptions 8 4.3 ACBUS Signal Options