en1090认证程序介绍.pptVIP

Bureau Veritas Presentation EN1090-1 certificating procedure The manufacturer shall implement a written inspection and test plan for checking and recording that manufactured components conform to their component specification. 制造商应执行书面的ITP，检查记录制造的部件符合部件规范 The component specification shall be prepared from design information. To the extent that the manufacturer undertakes the preparation of the component specification from design information Clause 6.3.4 applies. 部件规范应按设计信息编制 How to clear define component specification? How to clear get constituent products specification? Manufacturer and purchaser (or designers acting on their behalf) Bureau Veritas Presentation EN1090-1 certificating procedure Product evaluation 产品执行 The manufacturer shall establish procedures to ensure that the declared values and classes of all of the characteristics are maintained. The means of production control of characteristics and the sampling methods for a component or family to be evaluated shall be in accordance with Table 2. 制造是应建立程序确保维护公布的性能指标及等级，控制取样的方法应按表2 If the component specification includes a prescribed inspection and test plan for component properties then those requirements shall be followed in addition to the requirements given in Table 2. 如部件规范包括部件性能的附加检验试验，那些要求应作为表2补充 Sampling 作为最终目的。 关于Component Family的概念。 Bureau Veritas Presentation EN1090-1 certificating procedure 预紧螺栓的紧固 预紧力除非指定，应为 EN1993-1-8指出防滑预紧力，见表19 Bureau Veritas Presentation EN1090-1 certificating procedure 预紧螺栓紧固方法 根据交货标定级别K，选择紧固方法见表20 紧固前应留2mm调整空间 扳手精度应每周检查 Bureau Veritas Presentation EN1090-1 certificating procedure Assessment of factory production control （Annex B） FPC评估程序介绍（附录B） The tasks are dependant on whether the manufacturer performs a) manufacturing only or b) design and manufacturing. The tasks for both options are related to two assessment activities: Initial inspection of both the factory and the factory production control syste