1_横河CS3000功能块说明2.pdf

● Alarm Processing 报警处理 Alarm processing performs various types of alarm check during input processing, calculation processing and output processing in order to detect a process error. When an error is detected, the alarm processing reflects the detection of an alarm in the alarm status“ ” that is one of the data items of the function block, and also notifies a message indicating the detection result to the operation and monitoring. 报警处理执行输入处理， 计算处理及输出处理过程 中的各种报警检查以便发现处理的错误。 当一个错误被发现， 报警处理以报警状 态形式反映出检测到的报警， 报警状态为功能块的一个数据项， 并且通知监控一 个指示检测结果的信息。 ● Data Items 数据项 A function block retains various data according to the type of the function block in a database, which includes setup parameters and variable data that may be referenced or set during the operation. Abbreviated names that are assigned to these set parameters and variable data are generically called data items.“ ” For instance, the function block can perform calculation processing based on a specific data item value and can reflect that processing result in another data item. 一个功能块根据功能块的类型在数据库中保持各种数据，包括在操作过程 中可能会引用或设置的调整参数和变量。 The controls of the function block, such as MAN“ ” (manual) and AUT“ ” (auto), and the block mode“ ” that indicates the output status are some of the data items. 功能块的控制，例如手动和自动和指示输出状态的块模式都是一些数据 项。 Main data items are as follows: 以下是主要的数据项 ? Block mode (MODE) 块模式 ? Block status (BSTS) 块状态 ? Alarm status (ALRM) 报警状态 ? Process variable (PV) 过程变量 ? Setpoint value (SV) 设 定值 ? Manipulated output value (MV) 输出 值 C2. I/O Connection I/O 连接 By performing the I/O connection, data can be exchanged between a function block and the connection destination according to the connection method. 当执行 I/O连接时，数据依照连接方式能在功能块和连接目 标间进行交换。 ■ Connection Destination of I/O Connection I/O连接的连接目标 With I/O connection, the destination and method of connection for each I/O terminal of a funct