横河控制系统千兆冗余网卡.docxVIP

Contents Index General Specifications  Model VI702 Vnet/IP Interface Card GS 33K50C10-50E GENERAL By installing the control bus interface card into the PCI Express slot of the PC/AT compatible computer, the computer is connected to Vnet/IP. FUNCTION Interface between the PCI Express and Vnet/IP SPECIFICATIONS For conforming standards of the CENTUM VP system, see “System Overview (Vnet/IP Edition)” (GS 33K01A10-50E). Communication Speed 1 Gbps Full Duplex Connection Specifications Cable: CAT5e (Enhanced Category 5 cable), UTP Transmission: 1000BASE-T compliance Connector: RJ45 connector Max. distance: 100 m (Distance between VI702 and Layer 2 switch) PCI Express Specifications Applicable revision: PCI Express CEM Specification 1.0a x1, 2.5 GT/s signaling This card can be installed in a PCI Express slot (x1 to x16). This card cannot be installed in a PCI slot. Voltage Power supply voltage: 3.3 V ± 9 % Current Consumption Max. 2.5 A Weight Approx. 0.18 kg External Dimensions 111.15 x 167.65 (mm) Full-height, Half-length Regulartory Compliance EMC Standards: [CE Marking] [C-Tick Marking] [KC Marking]  PARTS NAME AND FUNCTIONS RDY lamp Lights when it diaghoses the card as normal. RCV lamp Lights when it detects signals on a control bus. SND lamp Lights when it sends signals to a control bus. Ethernet connector Connects a CAT5e (Enhanced Category 5 cable) BUS1 RCV lamp Ethernet connector SND lamp RDY lamp BUS2 U H F F01E.ai Figure Vnet/IP Interface Card (Front ) COMPATIBILITY WITH VI701 The Vnet/IP interface of VI702 is compatible with VI701 card so that the VI701 card and VI702 card can be installed together in a same bus. Moreover, setting the domain number and station number of a VI702 card can be performed in a same way as for a VI701 card. MODEL AND SUFFIX CODE Model Description VI702 Vnet/IP Interface Card ORDERING INFORMATION Specify model. TRADEMARKS CENTUM and Vnet/IP are registered trademark of Yokogawa Electric Corporation. Other product and company names