（现场管理）熟料新型干法水泥生产线制成车间工艺设计.docx

精品文档，助你启航，欢迎下载关注！ 精品文档，助你启航，欢迎下载关注！ 精品文档，助你启航，欢迎下载关注！ （现场管理）熟料新型干法水泥生产线制成车间 工艺设计 乐山金川 4700 t/d 熟料新型干法水泥生产线制成车间 工艺设计－P·O42.5R；P·C32.5 摘 要 本设计详细地论述了日产4700t/d熟料新型干法水泥tf整个生产工艺流程，生产P·O42.5R；P·C32.5水泥。根据产品要求进行熟料矿物组成设计和配料计算； 完成了物料平衡、主机平衡及储库这三大平衡计算，由物料平衡确定主机选型以及由储库平衡来确定堆场、堆棚和圆库的规格。重点设计放在制成车间—采用国内应用较多的联合粉磨系统。根据设计要求进行重点车间工艺计算和主要设备选型，合理安排车间工艺布置。同时还编写了全tf生产工艺流程概述和全tf生产质量控制系统及说明。 全tf引进国内外先进设备，使水泥的整个生产工艺流程顺畅，简洁，能适应现代水泥企业发展趋势。 关键词：水泥生产线；制成车间；工艺设计；4700 t/d；新型干法 Process Design on Made From the Workshop of 4700 t/d Clinker NSP Cement Production Line of LeShan JinChuan - P·O42.5R；P·C32.5 ABSTRACT This design introduces the technological process of Portland cement produced by dry method amply and its daily clinker production is 5000 ton.which produce three types cement of P·O42.5R, P·C32.5. According to the output required in the project, we need to design composition of clinker mineral and do the burden calculation, aslo complete the three major balancing calculation of materiel,mainframe and warehouse, we decide to type of mainframe and Specification of warehouse according to the balance of materiel, warehouse. The system of burning charge end which used Made from the workshop Combined grinding system adopts domestic is widely applied.According to the requirement of design, we complete the technological calculation of key workshop and decide to type of main equipment,reasonable arrange the layout of workshop process.meanwhile we write the outline of the whole factory of the technological process and the quality control system of whole plant production and explanation The equipments of the whole factory fetched in advanced both home and abroad, so as to the entire technological process of cement manufacture unhindered and succinctnessly. KEY WORDS：Cement production line；Made from the workshop；Process design；4700t/d；NSP 目 录 前 言 1 第 1 章 设计概述 3 水泥生产线设计特点 3 设计方案 3 题目 3 水泥品种 3 设计规模 4 生产方法 4 原始资料 4 原燃材料化学成分 4 煤的工业分析 4 其它 4 设计内容 4 设计原则 5 工tf总平面布置基本原则 5 工tf工艺设计基本原则 5 第 2 章 配料计