汽车电脑通讯协议：oe81c1100.pdfVIP

Features • Compatible with ISO 14230-4 • 2.7 to 6V operating range • MIL LED output • Only K Line communication • Fixed or variable PIDs • ECU address 0x33 • Slow init / fast init selection possible KWP2000 ECU • Physical and fonctional addressing simulator according • MODE 1..4 to ISO14230 and ISO15031-5 Description OE81C1100 OE81C1100 is intented to help the OBD protocol programmer. With a few external component , this chip simulate a ECU with K-Line diagnose output. Most of SAE J1979 PIDs are implemented. The PIDs are eighter fix or variable using a pot. When the DTC input is low , three DTC are generated and MIL LED is on till a erase DTC command comes. ( MODE3 and 4 ). The OE81C1100 communicate at 10400 baud with keywords 0x8F and 0xE9. With the slow/fast input user can select the init type of ECU. 1 Pin description Pin Pin Name Type Description 1 VREF I 2.5 V extern ref input for ADC 2 GND Ground 3 VCC Supply voltage 4 NC 5 NC 6 MIL O MIL LED max 5 mA for low current LED 7 TXK O K-Line output 8 RxK O K-Line input 9 BAUDIN 16 x RS232 Baudrate input clock 10 DTC I A low on this output generates 3 DTC 11 FIX/VAR I PID select fixed or variable 12 SL/FS I 1:slow 0:fast init. input 13 TXD O RS232 output 14 RXD I RS232 input 15 XTAL2 I 16 Mhz crystal input 16 XTAL1