模具冷卻設計的目的 .pptxVIP

模具冷卻設計的目的 Purposes of Mold Cooling Design;薄殼產品不像傳統壁厚者一般可以承受較大的因熱傳不均而產生的殘餘應力。 為了將收縮彎翹控制在可以接受的程度，均衡的冷卻設計變得非常重要。 Thin-wall part can not afford as much thermal induced residual stress as the conventional one does. An even cooling design becomes very important to control the shrinkage and warpage at an acceptable level.;射出成型週期時間 Injection Molding Cycle Time;對冰箱蔬果盤之類的大零件而言，材料往往佔成本50%以上。 對小而薄的零件而言， 成形機費用可佔成本的90% ，材料6% ，而模具只佔4%。 小而薄的產品較之厚者更能從冷卻的改善而獲得效益。 For larger molded parts, material typically represents more than 50% of the part cost for a refrigerator crisper tray. In the case of a thin-wall s