STM笔记完整版资料.pdfVIP

STM 笔记 New Project Step 1: Add same new file in somewhere 1. 1_stm_libray file is for CMSIS and STM32F4xx_StdPeriph_Driver This two include all of the chip’s massage(Cortex-M4 and Periph). 2. 1_ stm_user is include the template for create a New Project. 3. USER_Project is for user to save new project. Step 2: add new groups and add file to it Step 3: click target Options to configure the chainline 第 1 页 STM 笔记 1. USE_STDPERIPH_DRIVER STM32F40_41xxx is to tell chainline we will use the library and what processor we are using. 2. Inculde Paths is to set chainline path for header file. We should add three path for it , first is the project path, second is the CMSIS’s Include file’s path that is for Cortex – M4, third is STM32F4xx_StdPeriph_Driver’s Icnclude file that is for Periph. Debug: 1.编译时提示 warning: #1-D: last line of file ends without a newline 解决办法: 将光标移到提示告警的代码最后一行（有代码的那一行） 然后按住 del 键，直到确定下面没有回车行 最后回车一下或多下即可 2. #define STM32F4XX STM32F40XX 为什么在编译器设置里还要在 keil 中 options-C++-Define 中定义 USE_STDPERIPH_DRIVER,STM32F4XX？ warning: #47- D: incompatible redefinition of macro STM32F4XX 解决办法: 不需要在 Keil target options -C/C++中预先定义 STM32F40XX Programming Note: 1. 规范的位操作 1. 位清 0 操作 2. 位置 1 操作 3. 位取反操作 第 2 页 STM 笔记 2. STM32F4 系统时钟设置 (1) Void RCC_HCLK_Config(uint32_t RCC_SYSCLK) 3. GPIO 配置: 以配置GPIOD5 为例 void LED_GPIO_Config(void) { /* define GPIO_InitTypeDef structure for manipulating GPIO */ GPIO_InitTypeDef* GPIOD5_InitStruct; /* enable GPIODs clock */ RCC_AHB