mastercam9.1四轴半四轴定面加工后处理.doc

# Post Name : MPFAN # Product : MILL # Machine Name : GENERIC FANUC # Control Name : GENERIC FANUC # Description : GENERIC FANUC MILL POST # 4-axis/Axis subs. : YES # 5-axis : NO # Subprograms : YES # Executable : MP v9.10 # WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE. # # -------------------------------------------------------------------------- Revision log: -------------------------------------------------------------------------- Programmers Note: CNC 01/12/01 - Initial post update for V8.1 CNC 07/02/01 - Add cant