icem_cfd_cfx流体学习集锦cfx_icemcfd_11_培训教程_2008_04 cfx11_w6_tankflush.pptVIP

1/25/05 ANSYS, Inc. Propietary Tank Flushing Workshop 6 Introduction Mesh Import Start a new simulation in CFX-Pre Right-click on Mesh in the Outline tree and select Import Mesh Set the File type to ICEM CFD and then set the Mesh Units to cm For some mesh formats it is important to know the units used to generate the mesh Import the mesh flush.cfx5 Define Simulation Type Edit the Simulation Type object in the Outline tree Set the Simulation Type Option to Transient Set the Total Time to 2.5 [s] Set the Timesteps to 0.01 [s] and click Ok The simulation will have 250 timesteps Edit Default Domain Edit Default Domain from the Outline tree Set the Fluids List to Air at 25C and Water Use the … icon and the Ctrl key to pick multiple fluids Turn on Buoyancy and set the (X, Y, Z) gravity components to (0, -g, 0) Use the expression icon to enter -g ( g is a built-in constant ) Set the Buoy. Ref. Density to 1.185 [kg m^-3] This is the density of Air at 25 C. Search the help for “Buoyancy in Multiphase Flow” (including the quotes in the search for more details Edit Default Domain Switch to the Fluid Models tab Under Multiphase Options, enable the Homogeneous Model toggle This makes the simplifying assumption that both phases share the same velocity field Set the Free Surface Model Option to Standard This changes some solver numerics to resolve the free surface interface better Under Heat Transfer, enable the Homogeneous Model toggle and set the Option to None Set the Turbulence Model Option to k-Epsilon Edit Default Domain Switch to the Fluid Details tab Select Air at 25 C and set the Morphology Option to Continuous Fluid Select Water and set the Morphology Option to Continuous Fluid Edit Default Domain Switch to the Fluid Pairs tab Enable the Surface Tension Coefficient toggle and set the coefficient to 0.072 [N m^-1] Under Surface Tension Force, set the Option to Continuum Surface Force Set the Primary Fluid to Water Under Interphase Transfer, set the Option to Free Surface