服装厂缝纫机资料_QD686 URSER MANUAL琦星.pdfVIP

Safety Instructions 1. Users are required to read the operation manual completely and carefully before installation or operation. 2. All the instructions marked with signs must be observed or executed; otherwise, bodily injuries might occur. 3. The product should be installed and pre-operated by well trained persons. 4. For perfect operation and safety, it is prohibited that using extension cable with multi-outlet for power connection. 5. When connecting power supply cords to power sources, it is necessary to make sure that the power voltage is lower than 250 VAC and matches the rated voltage indicated on the motor’s name plate. ※Attention : Attention: If the Control Box is AC 220V system, please don’t connect the Control Box to AC 380V power outlet. Otherwise, the error will occur and motor will not work. If that happens, please turn off the power immediately and check the power voltage. Continuously supplying the 380V power over 5 minutes might damage the fuses F2, burst the electrolytic capacitors (C58, C59), damage the power module U14, and even might endanger the person safety. 6. Don ＇t operate in direct sun light ，outdoors area and where the room temperature is over 45°C or below 5°C. 7. Please avoid operating near the heater at dew area or at the humidity below 30% or above 95%. 8. Don ＇t operate in area with heavy dust, corrosive substance or volatile gas. 9. Avoid power cord being applied by heavy objects or excessive force, or over bend. 10. The earth wire of power cord must be connected to the system ground of the production plant by proper size of conductions and terminals. This connection should be fixed permanently. 11. All the moving portions must be prevented to be exposed by the parts provided. 12. Turing on the machine in the fi