comsol错误提示及解决方法.pdfVIP

Diagnostics : Error Messages Error Messages This section summarizes the most common error messages and solver messages generated by COMSOL Multiphysics. All error messages are numbered and sorted in different categories according to the following table. TABLE 2-1: ERROR MESSAGE CATEGORIES NUMBERS CATEGORY 1000 –1999 Importing Models 2000 –2999 Geometry Modeling 3000 –3999 CAD Import 4000 –4999 Mesh Generation 5000 –5999 Point, Edge, Boundary, and Subdomain Specification 6000 –6999 Assembly and Extended Mesh 7000 –7999 Solvers 8000 –8999 Postprocessing 9000 –9999 General For error messages that do not appear in the following lists, contact COMSOL ’ s support team for help. 2000 –2999 Geometry Modeling TABLE 2-2: GEOMETRY MODELING ERROR MESSAGES ERROR ERROR MESSAGE EXPLANATION NUMBER 2118 Negative output from Incorrect Geometry M-file. empty input 2119 Non scalar output from Incorrect Geometry M-file. empty input 2120 Normal directions are Incorrect input data from STL/VRML import. inconsistent 2138 Self intersections not Curves resulting in self-intersections are not supported supported. 2140 Singular extrusions not Error in input parameters. supported 2141 Singular revolutions not The revolved mesh has a singularity at the z axis. If supported possible, create the cylinder using a 3D primitive or by revolving the geometry before meshing. 2146 Subdomain must Incorrect geometry for mapped mesh. bounded at least four boundary segments 2147 Subdomain must bound Incorrect geometry for mapped mesh. one connected edge component only 2190 Invalid radius or distance Incorrect input paramet