41-pcb高速串行链路ami模型分析原始报告ws05_designer_si_ibis_ami.pptxVIP

Table of ContentsIBIS-AMI ExampleIBIS-AMI setupDriver settingsReceiver settingsSolution settingsStatistical eye diagram reportingBackgroundIBIS-AMI is a new kind of simulation technology that was introduced in version 5.0 of the IBIS specificationAn AMI model is a compiled (.dll or .so) model that is included by a traditional buffer modelThe buffer controls the analog behavior: impedance, rise/fall times, input capacitance, etc.The .dll contains higher level behavioral modeling usually focused on functionality such as equalization and clock data recoveryIn Designer 8, IBIS-AMI models are imported via the same mechanism that standard IBIS models are brought into the schematicThis workshop will go over the additional steps required to set up and simulate AMI modelsIBIS AMI ExampleIntroductionThe goal of this exercise is to learn how to use the ANSYS Designer interface to work with IBIS-AMI drivers and receivers. To do this, you will analyze a schematic of an example high-speed serial channel using S-elements, a W-element, and an IBIS-AMI driver and receiver.Launching ANSYS DesignerTo launch ANSYS Designer, click the Microsoft Start button, select:All Programs ANSYS Electromagnetics Designer 8.0 Designer 8.0To open the AMI project:In the ANSYS Designer window select the menu item File Open.In the Open dialog, browse to the folder containing the WS05_IBIS-AMI.adsn project file, select that file, and click Open.IBIS AMI ExampleExamine the designYou will now see the WS05_IBIS-AMI project open in the Designer window. In the Project Manager, expand the WS05_IBIS-AMI project and the Example Channel design; the Example Channel design will already be open in the schematic editor.IBIS AMI ExampleExamine schematicIn the Designer window, examine the schematic the example channel for use in this exercise:S-parameter package modeW-element 20 inch stripline modelS-parameter via modelS-parameter connector modelImport AMI ComponentsImporting AMI ComponentSelect the menu item Too