装配结构的合理性.pptxVIP

Rationality of Fitting Structure  装配结构的合理性;Structures of parts contact 接触处的结构;Structures of parts contact 接触处的结构;When drawing, one should ensure that the external thread fully goes into the internal thread. The external thread should have an escape or the internal thread should have a chamfer. 要使外螺纹全部拧入内螺纹中，外螺纹终止处应有退刀槽, 内螺纹起始端应有倒角。;2. Convenient structures for disassembly 拆装方便结构 ; To produce an annular groove (standard structure, the dimension of which can be consulted) in the hole to mount the shaft, and insert the felt ring in the groove and make it tightly in contact with the shaft for Sealing. 在装轴的孔内开出一个环槽(属标准结构, 尺寸可查设计手 册)，将毛毡圈置于槽内并与轴紧密接触, 可起密封作用。;2. Stuffing box sealing device 填料函密封装置结构;3. Washer sealing device 垫片密封装置结构; Exercise 练习题;本 小 节 结 束;Structures of parts contact 接触处的结构;;请 点 击 鼠 标 左 键 显 示 后 面 内 容;;轴端螺纹应伸进孔里;Removable joint structures 可拆连接结构;Inappropriate 不合理;Removable joint structures 可拆连接结构;在图片上点击鼠标左键可以“暂停”或再次“播放”;在图片上点击鼠标左键可以“暂停”或再次“播放”;在图片上点击鼠标左键可以“暂停”或再次“播放”;Structures of parts contact 接触处的结构;Structures of parts contact 接触处的结构; To produce an annular groove (standard structure, the dimension of which can be consulted) in the hole to mount the shaft, and insert the felt ring in the groove and make it tightly in contact with the shaft for Sealing. 在装轴的孔内开出一个环槽(属标准结构, 尺寸可查设计手 册)，将毛毡圈置于槽内并与轴紧密接触, 可起密封作用。;本 小 节 结 束;Inappropriate 不合理;在图片上点击鼠标左键可以“暂停”或再次“播放”