心脏起搏器培训资料:单腔识别.pptVIP

  • 4
  • 0
  • 约3.12万字
  • 约 67页
  • 2021-05-30 发布于安徽
  • 举报
Parameters Stability – Interval threshold used to identify unstable ventricular intervals. Off(N); 30; 40 … 100 ms Considerations Review the following information before programming Stability parameters. Stability interval – A small Stability value may not allow for normal VT interval variation and may decrease the sensitivity of the device to detect VT. So, it should be programmed large? 4.3.1.0 450-40030,未到3 VT Monitor events and Stability – Stability can also reset the VTM event count but does so independently from its operation on the VT event count. The VTM event count must be at least

文档评论(0)

1亿VIP精品文档

相关文档