心脏起搏器培训资料:术后程控与患者随访.pptVIP

  • 4
  • 0
  • 约1.12万字
  • 约 30页
  • 2021-05-30 发布于安徽
  • 举报

心脏起搏器培训资料:术后程控与患者随访.ppt

* There are five main steps to programming the ILR when using auto activation. Step 1: Select one of the two modes that will store both patient and auto activated events. Step 2: Select length of total storage time (Note: the 42 minute option is data compressed to 50 Hz. We recommend this option which will provide good quality ECG) Step 3: Tap the Auto Activation Parameters button. * Select auto activation trigger criteria for brady, tachy and asystole options Select Accept Step 4 is next: Select Gain Setup from the Main screen to start gain and sensitivity setup. * Since R-wave amplitude va

文档评论(0)

1亿VIP精品文档

相关文档