SULZER苏尔寿大型潜水排污泵ABS XFP 100J - 600X产品技术数据表-60HZ.pdf

Submersible Sewage Pump Type ABS XFP 100J - 600X 60 Hz Submersible sewage pump type ABS XFP is designed for municipal and industrial wastewater equipped with Premium Efficiency IE3- level motor. Suitable for clean water and wastewater, sewage with sludge and high rag content, solids and fibrous material. Construction • Premium Efficiency IE3 motors in accordance with NEMA and IEC 60034-30. Testing in accordance with IEC60034-2-1. • The water-tight fully flood-proof motor and the pump section form a compact and robust unit, easy to clean and easy to service. • Water pressure sealed connection chamber, with two stage cable entry, protected against excessive cable tension and bending. • Bimetallic thermal sensors in the stator which open at 140 °C (284 °F). • Rotor and shaft dynamically balanced, upper and lower bearings lubricated-for-life, maintenance-free. Hydraulics • Insulated upper bearing for VFD operation standard for PE6 and You have the choice of the following hydraulics in the range of DN optional for PE5. 100 to DN 600 (4 to 24 in) discharge: • Triple shaft sealing. • Upper and lower sealing by means of a silicon carbide/silicon Hydraulics / Impeller type carbide mechanical seal, independent of the direction of rotation. Hydraulics / Impeller type • Inspection chamber with moisture sensor to indicate water XFP 105J (4 inch) CB2 XFP 100J (4 inch) CH1 leakage through mechanical seal. XFP 155J / 150M (6 inch) CB2 XFP 100J (4 inch) CH2 • Option: Blockage- and maintenance-free