220-60kV降压变电所毕业设计.docxVIP

摘要 电气工程及其自动化专业的毕业设计是培养学生综合运用大学期间所学理 论知识，独立分析和解决工程实际问题的初步能力的一个重要环节。 本设计是根据毕业任务书的要求，综合大学期间所学的专业知识及《电力工程电气设计手册》，《电力工程电气设备手册》等书籍的有关内容，在指导教师的帮助下，通过本人的精心设计论证完成的。整个设计过程中，全面细致的考虑工程设计的经济性，系统运行的可靠性，灵活性等诸多因素，最终完成本设计方案。 本设计说明书是根据毕业设计的要求，针对220/60kV降压变电所毕业设计 论文。本次设计主要是一次变电所电气部分的设计，并做出阐述和说明。本论文介绍了文关220KV降压变电所电气部分初步设计，共分为七大步骤。即：1、选择本变电所主变压器的型号、容量和台数。2、设计本变电所电气主接线的基本形式。3、进行短路电流计算。4、进行主要电气设备的选择。5、进行本变电所高压配电装置的规划设计。6、进行本变电所继电保护和自动装置的规划设计。7、进行本变电所防雷保护的规划设计等七大步骤。本论文结合电气的有关规程进行设计，并附有五张设计图纸（电气主接线图一张、变电所断面图两张、平面布置图一张、防雷保护图一张、继电保护原理图一张），可为以后的设计做些参考。 关键词：变压器，电气主接线，防雷保护，继电保护等。 Abstract The graduation project of electrical engineering and automation major is an important link to cultivate students preliminary ability to analyze and solve practical engineering problems independently by comprehensively using the theoretical knowledge they learned in University. This design is based on the requirements of the graduation assignment book, the professional knowledge learned during the University and the relevant contents of Electric Power Engineering Electrical Design Manual, electric power engineering electrical equipment manual and other books, with the help of the instructor, through my careful design and demonstration. In the whole design process, the economy of engineering design, the reliability and flexibility of system operation are considered comprehensively and carefully, and finally the design scheme is completed. This design specification is based on the requirements of graduation design, aiming at the graduation design thesis of 220 / 60KV step-down substation. This design is mainly a substation electrical part of the design, and make elaboration and explanation. This paper introduces the preliminary electrical design of Wenguan 220KV step-down substation, which is divided into seven steps. That is: 1. Select the type, capacity and number of main transformers in the substation. 2. Design the basic form of the main electrical wiring of the substation. 3. Calculate the short circuit cur