抽油烟机培训资料.pptxVIP

基于标准UL507 2003版 ;触电危险; 防火危险 过热危险 机械危险 爆炸危险 辐射危险 其他危险 ;CONSTRUCTION 6 Frame and Enclosures 6.1 General 6.1.1 An appliance shall be formed and assembled so that it has the strength and rigidity necessary to resist the abuses to which it is subjected, without causing a risk of fire, electrical shock, or injury to persons due to total or partial collapse with a resulting reduction of spacings, loosening or displacement of parts, or other serious defects. 6.1.2 A cast- or sheet-metal section of the enclosure shall not be thinner than the applicable value specified in Table 6.1. Exception No. 1: A small area or surface that is curved or otherwise reinforced to provide equivalent mechanical strength is not required to comply with the specifications in the first column of thicknesses in Table 6.1. Exception No. 2: A section of the enclosure made of uncoated or galvanized sheet steel or cast malleable iron shall not be thinner than the specifications in the first column of thicknesses in Table 6.1 unless such factors as the following are determined to be acceptable: ;6.4.1 Polymeric material used to enclose a metal housing that encloses insulated or uninsulated live parts, or used as a decorative part, shall be classed either 5VA, 5VB, V-0, V-1, V-2, or HB by the burning tests described in the Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances, UL 94. PCB板盒的外壳胶料需UL认证，最少ＨＢ级别 ; Flame Spread and Smoke Developed Requirements for Non-Metallic Enclosures and Other Parts of Permanently Connected Equipment (not applicable) ;;;;;１）抽油烟机，应作为永久连接供电方式的产品，其产品主体安装细节应在 说明书中说明． ２）供电安装方式也应在说明书中详细说明．包括电源线型号的选择，线径 长度的使用等选择． An appliance, other than as noted in 11.2.1 – 11.2.3, is to be mounted in accordance with the mounting requirements specified in the appropriate section of this Standard. ; 1） 产品中的钢，铁等金属，应做适当的防锈处理，如电镀等方式等． ２）产品中不同金属材质之间的连接，应考虑防止电化学腐蚀的影响， 如铜和铝材料不应直接接触． ; Power Supply Connections – Permanently-Connected Appliances HS, HSO, H